【In StoClovis Cummings MDSilas Kozeyck+High QSandra Hettingeruality】Walkie TalMs. Salma GibsonRhea Hoppe MDkies Toy fDarwin Krajcikor ChiMr. Nathanael Bernhardldren, Shawna Wyman Jr.22 ChannelArmand Mitchell Radio with Dr. Matteo Dicki PhDBackliProf. Xzavier BorerProf. Telly Kutchght, Prof. Hans Anderson ILCD Torch, 3Cornell Hane~5Km RanLucienne Lednerge for Jedidiah FriesenLila JacobiOutdoor AdventProf. Matilda Waelchi DDSGlenna Harveyures, CampMargot JohnstonProf. Orie Kinging, HikinDr. Christiana Stiedemanng, Ages 3-12Katrine O'Keefe

Product function: parent-child interaction, ultra-distance talkback, flashlight
Channel: 22
Subcode: CTCSS: 38 DCS: 61
Battery: 600 mA with protection board
Charging time: 2 hours
Frequency: FRS: 462.55000-467.71250MHz
Range: up to 3 kilometers (at sea level)
Transmission power: ≦500Mw
Modulation type: F3E
Channel spacing: 12.5KHZ
Product material: environmentally friendly PC shell

packing list:
Walkie-talkie × 2,
USB cable×1,
Manual×1,
Lanyard×2
Machine size 63*25*143mm

Basic operation:
1. Press and hold the power for 3-4 seconds to start the walkie-talkie.
2. Press the menu key MENU to enter the channel setting. At this time, the channel number on the screen starts to flash, use the ▲/▼ keys to select the channel, and press PTT to save the setting after setting.
3. Press the MENU button twice to enter the group code mode, at this time the group code icon on the LCD screen flashes, use the ▲/▼ keys to select. Closed means no code, 01-38 means CTCSS code, 39-99 means DCS code.
4. Press the menu key MENU three times to enter the voice control function (VOX) setting, enter the setting page, there will be OF, 1, 2, and 3 sensitivity options, use ▲/▼ to select
5. Press the menu key MENU four times to enter the Call tone selection setting, there are ten call tone selections from 01 to 10.
6. Press the menu key MENU five times to enter the key tone setting, use ▲/▼ to set, when the selection is ON, the key sound is turned on, and when the OF is selected, the key sound is turned off.
7. Press the menu key MENU six times to enter the transmission end tone selection mode, use ▲/▼ to select, press ▲ or ▼ to select ON and release PTT will have a tone, select OF to close, press PTT to save.
8. Press the menu key MENU seven times to exit the setting page, or press the PTT key to exit the setting page.